Taurus Acoustic Qube-350 Bass Amplifier 350W

The Taurus QUBE-350 Acoustic Bass Amplifier is designed primarily for bass players and bassists who use acoustic basses. However, it is versatile and can be used effectively to amplify different types of bass guitars, both with passive and active electronics.

The bass amplifier has two independent channels that allow the bass to be amplified in several ways: with a microphone, a piezo pickup or both sources at the same time, giving the possibility of any mix of these signals. The ability to use two sources simultaneously means that the amplifier can also be used to connect two different instruments, allowing each channel to be played simultaneously or independently.

Each channel is equipped with individual tone and gain level (GAIN) adjustments, significantly expanding the possibilities of tone shaping. Tone correction has been designed so as not to introduce specific "emphasis," allowing for a very faithful sound of the instrument during amplification.

The QUBE-350 Acoustic bass amplifier was built with analog technology, using a class-D power amplifier. This innovative combination has allowed the amplifier to be compact and lightweight, making it a practical and portable solution for musicians.

SPECIFICATION

• Output power: 350W RMS / 4ohm, 200W RMS / 8ohm
• XLR inputs: 1ookohm (symmetrical) suitable for microphones and instruments with symmetrical output.
• JACK inputs: 1Mohm (unbalanced) - universal, suitable for instruments with active and passive pickups.
• PHANTOM power supply for condenser microphones: 48V
• 2 channels: A and B with separate tone and dynamic control.

A channel control:

• GAIN - gain control of the preamp input section
• DBS - tone boost for bass and treble.
• has an application with bass guitar in mind gives a contoured tone character
• BASS and TREBLE equalizer with "MLO" system
• MIDDLE - mid tone control

B channel adjustment:

• GAIN - gain control of the preamp input section
• BASS and TREBLE equalizer with "MLO" system
• MIDDLE - PARAMETER EQUALIZER for fine adjustment of midrange tones

MASTER:

• Common gain control of both A and B channels
• Channel switch: (A), (A+B). (B)
• MUTE - quick mute of the amplifier
• PHASE - phase reversal of the signal in the "B" channel.

Additional features and functions:

• Subsonic filter at the preamp input cutting off the signal band below 40Hz
• Effects loops: serial SEND / RETURN loop
• LINE-OUT - line output with speaker cabinet simulation.
• GROUND LIFT - ground circuit breaker on line output.
• PROT - power amplifier overload indicator light
• CLIP - power amplifier overdrive indicator light
• Power selector 230V/50Hz - 120V/60Hz
• Protections: thermal, short circuit and overload protection
• Dimensions: (W x S x G) 80 x 245 x 180 m
• Weight: 2.0kg

Taurus products are designed and handmade in Poland. Adam Kozakiewicz founder of Taurus Amplification, a musician, sound engineer and electronics engineer has been providing the market with the best and fully professional music equipment for 35 years. Hand processing and quality control guarantee the highest quality and complete satisfaction.